scooter36863
Junior Member
'95 trooper limited, dana 44 SAS welded up, 37 inch MT/R's, 4.56 gears, ARB bumper
Posts: 48
|
Post by scooter36863 on Jan 13, 2005 17:53:11 GMT -5
I have a complete front ifs and all the steering out of a '95 trooper b/c of the axle swap, there is also another 3 inch calmini lift. If anyone wants or needs any of these parts I will be more than happy to let them go for super cheap b/c they are no good to me anymore. If anyone wants the lift then I'll throw in some extra tie rods, torsion bars, and maybe some other stuff for a few hundred bucks.
|
|
|
Post by rinker36 on Mar 21, 2005 18:59:08 GMT -5
hey how much would u sell th calmini lift with the extras thrown in and how good of condition are they in?
|
|
scooter36863
Junior Member
'95 trooper limited, dana 44 SAS welded up, 37 inch MT/R's, 4.56 gears, ARB bumper
Posts: 48
|
Post by scooter36863 on Mar 21, 2005 20:28:01 GMT -5
The lift is in almost new condition, it needs to be cleaned up a bit, but it was never wheeled when it was on, it was just for show. If you look at calminis site they are asking $730+ for it , I will sell it with the extra parts for $500+shipping
|
|
|
Post by rinker36 on Mar 22, 2005 16:09:50 GMT -5
what all are included in the extra parts?...are the torsion bars bigger than stock... and is the lift still $300 if i were to just get that
|
|
|
Post by rinker36 on Mar 22, 2005 16:20:30 GMT -5
does this lift allow for good clearance with 33"s?
|
|
scooter36863
Junior Member
'95 trooper limited, dana 44 SAS welded up, 37 inch MT/R's, 4.56 gears, ARB bumper
Posts: 48
|
Post by scooter36863 on Mar 22, 2005 17:07:09 GMT -5
the lift will clear 33's easily. I was ruinning 33x12.50's with no rubbing at all and I think you could run the 34x10.50 swamper with no trouble either. the torsion bars are much stronger then the stock ones and i will include extra tie rods too. I have been offered (by a local guy) $450 for the lift kit so if you want it youll have offer better than that but if you want to do $500+ shipping I will give you the kit and extra parts. The kit is in great condition and just as good as a new one from the manufacturer, so since they want to charge over $730 I think $500 including extra parts is a good price.............
|
|
|
Post by rinker36 on Mar 22, 2005 18:08:45 GMT -5
does this kit work with coil spacers or does it already have them?
|
|
|
Post by rinker36 on Mar 22, 2005 18:14:21 GMT -5
and it does come with the shocks right?....sorry for all the questions
|
|
scooter36863
Junior Member
'95 trooper limited, dana 44 SAS welded up, 37 inch MT/R's, 4.56 gears, ARB bumper
Posts: 48
|
Post by scooter36863 on Mar 22, 2005 20:04:46 GMT -5
the shocks have been used as they were on the trooper and calmini's shocks aren't that great anyways, but will include them if you want.
|
|